期刊文献+

环氧树脂型磁弹磨粒对刀具刃口钝化的实验分析

Experimental Analysis of Tool Edges Dulling by Epoxy Resin Type Magnetic Elastic Abrasive Grains
下载PDF
导出
摘要 为探究基于环氧树脂型磁弹磨粒在双磁盘磁场中对刀具钝化的影响,以黏弹性的丙烯酸酯为基体,制备出一种具有导磁性及研磨功能的磁弹磨粒。通过电子显微镜观察环氧树脂型磁弹磨粒形状特征,并测试环氧树脂型磁弹磨粒的密度、硬度和粒度等物理参数,基于磁弹磨粒在双磁盘磁场中对刀具刃口钝化的机制,建立环氧树脂型磁弹磨粒对刀具刃口钝化的实验方案。实验发现,环氧树脂型磁弹磨粒对降低刀具前后刀面的钝化值以及提高刀具刃口表面的粗糙度值都有很明显效果。 In order to study the effect of magnetic elastic abrasive based on epoxy resin on tool passivation in dual-disk magnetic field,a magneto-elastic abrasive particle with magnetic permeability and abrasive function is prepared by using viscoelastic acrylate as matrix.The shape characteristics of epoxy resin magnetic elastic abrasive particles are observed by electron microscope,and the physical parameters such as density,hardness and particle size of epoxy resin magnetic elastic abrasive particles are tested.Based on the passivation mechanism of magnetic elastic grits on cutting edge in double-disk magnetic field,an experimental scheme of passivation on cutting edge by magnetic elastic grits of epoxy resin is established.It is found that the magnetic elastic abrasive of epoxy resin has obvious passivation effect on reducing the passivation value of the front and rear tool surfaces and improving the roughness value of the cutting edge surface.
作者 袁银 赵雪峰 游科 殷小龙 Yuan Yin;Zhao Xuefeng;You Ke;Yin Xiaolong(不详;School of Mechanical Engineering,Guizhou University,Guiyang 550025,China)
出处 《工具技术》 北大核心 2023年第6期18-22,共5页 Tool Engineering
基金 国家自然科学基金(52065012)。
关键词 磁弹磨粒 刀具钝化 粗糙度 双磁盘 magneto-elastic abrasive grains tool passivation roughness RVE model
  • 相关文献

参考文献3

二级参考文献8

  • 1赵玉刚.磁粒光整加工技术的应用与发展[J].现代制造技术与装备,2006,42(2):9-13. 被引量:9
  • 2[3]T.Shinmura、H.Yamaguchi,Study on a New Internal Finishing Process by the Application of Magnetic Abrasive Machining (Internal Finishing of Stainless Steel Tube and Clean Gas Bomb).JSME International Journal(Series C),1995 (4),P798-804.
  • 3[4]T.Shinmura et al.,A new internal finishing process of a non-ferromagnetic tubing by applying a rotating magnetic field,Int.J.JSPE 1992(4),P302-304.
  • 4[5]Jeong-Du Kim、Youn-Hee Kang 、Young-Han Bae,Development of a magnetic abrasive jet machining system for precision internal polishing of circular tubes.Journal of Materials Processing Technology.1997(7),P384-393.
  • 5[5]T.Shinmura,Development of splindle-finish type finishing apparatus and its finishing performance using a magnetic abrasive machining process,JSPE 1986(2),P79-84.
  • 6[9]T.Shinmura,Development of a Unit System Magnetic Abrasive Finishing Apparatus using permanent Mag(上接第13页)nets.Bull.Japan Soe.Of Prec.Engg.,1989(4),P313-315.
  • 7赵玉刚,赵增典,黄玉红,钟善.常压固相烧结法制备磁性磨料及其性能的研究[J].兵器材料科学与工程,2009,32(4):1-4. 被引量:7
  • 8王栋梁,李秀红,李文辉,杨胜强.以107硅橡胶为基体的粘弹性磁性磨具制备及实验研究[J].表面技术,2018,47(6):258-264. 被引量:5

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部