Effects of slurry viscosity and particle additive size on filter cake formation in highly permeable sand

Filter cake is critical to maintaining the stability of the excavation face of an underwater shield tunnel in a high-permeability stratum.In a high-permeability formation,generating an effective filter cake on the excavation face is difficult with a pure bentonite slurry,which penetrates the ground and may not achieve the required suspension pressure.Determining how to efficiently and quickly form a thin and low-permeability filter cake on the tunnel working face has become a key engineering problem in the construction of slurry shield tunnels in high-permeability strata.In this study,the relationship between slurry viscosity and the slurry pressure gradient of pure bentonite was established by performing slurry permeability experiments.The influence of slurry viscosity on the formation of the filter cake in a high-permeability formation was studied under different pressure gradients.In addition,the effect of additive particle size on the slurry filter cake formation was analyzed by introducing additives with different particle sizes to pure bentonite slurries with different viscosities.The test results indicate that(1)for the pure bentonite slurry,the critical initial pressure gradient can be used as a rough indicator of the formation of the filter cake,and the relationship between the critical maximum pore diameter and the average pore diameter of the for-mation can be compared to establish and analyze the formation law of the slurry filter cake;(2)adding particles to the slurry can enhance the effect of the pure bentonite slurry;and(3)adding coarse-grained materials can effectively improve the film-forming effect.The slurry is more compact when the particle size is close to the average pore size of the formation.