摘要
The mechanical properties and constitutive modeling of Shanghai clays are very important for numerical analysis on geotechnical engineering in Shanghai,where continuous layers of soft clays run 30-40 m deep.The clays are divided into 5 major layers.A series of laboratory tests are carried out to investigate their mechanical properties.The top and bottom layers are overconsolidated hard clays,and the middle layers are normally consolidated or lightly overconsolidated sensitive marine clays.A constitutive model,which can describe the overconsolidation and structure of soils using only 8 parameters,is modified to simulate the test results.A rational procedure to determine the values of the material parameters and initial conditions is also proposed.The model is able to effectively reproduce both one-dimensional(1D)consolidation and drained/undrained triaxial test results of Shanghai clays,with one set of parameters for each layer.From element testing and constitutive modeling,two findings are obtained.First,the decay rates of overconsolidation are smaller in overconsolidated layers than in normally consolidated layers.Second,the natural microstructure of layer 4 is relatively stable,that is,a large degree of structure is still maintained in the specimen even after 1D consolidation and drained triaxial tests.The modified model and obtained parameter values can be used for numerical analysis of geotechnical projects in Shanghai.
