摘要
GB 51251-2017《建筑防烟排烟系统技术标准》第3.1.3条第2款对前室机械加压送风口设置作了严格要求,为了研究加压送风口不同设置方式对前室防烟效果的影响,以采用机械加压送风防烟形式的单入口独立前室为研究对象,借助PyroSim分别对前室加压送风口的位置、送风角度和送风口布置方式对前室门洞断面风速和前室烟气流动的影响进行了模拟研究。结果表明:送风口设置在前室门正上方时防烟效果最好,其次是在正对前室门的位置;合适的送风角度能够将送风气流引向前室门以改善防烟效果;正对前室门设置送风口时横向布置比竖向布置防烟效果更好。
Article 3.1.1(2)of Technical standard for smoke management systems in buildings stipulates strict requirements for the mechanical pressurized air supply outlet settings in the vestibule.In order to study the effect of different setting methods of pressurized air supply outlet on the wind speed of the vestibule doorway section and the smoke prevention,this paper took a single entrance independent vestibule which adopts pressurization air supply to prevent smoke as research project,PyroSim was used to simulate the wind speed of the vestibule doorway section and the smoke flow in the vestibule under different settings of pressurized air outlets locations,air supply angles and arrangements of outlets.The results show that the effect of smoke prevent in the vestibule is the best when the air supply outlet is set above the door of vestibule,followed by the location opposite the vestibule door.Setting the air supply angle to lead the air to the vestibule door will improve the smoke prevention effect.When the outlet is set opposite the vestibule door,the horizontal arrangement is better than the vertical arrangement.
作者
庄约翰
刘冬华
豆鹏亮
焦良珍
Zhuang Yuehan;Liu Donghua;Dou Pengliang;Jiao Liangzhen(School of Urban Construction,Wuhan University of Science and Technology,Hubei Wuhan 430070,China;Nanning Survey and Design Institute Group Co.,Ltd.,Guangxi Nanning 530200,China)
出处
《消防科学与技术》
CAS
北大核心
2023年第5期665-669,共5页
Fire Science and Technology
基金
南宁市建筑消防安全评估标准体系建设
建设工程消防验收现场评定技术研究与应用。
关键词
前室
送风口位置
送风角度
送风口布置
烟气控制
数值模拟
vestibule
locations of outlet
air supply angles
arrangements of outlet
smoke prevent
numerical simulation