摘要
Naturalfibre as a reinforcing agent has been widely used in many industrial applications.Nevertheless,several factors need to be considered,such as the size and weight percentage of thefibre used in binding.Using fused deposition modelling(FDM),this factor was investigated by varying the size of naturalfibre as the responding variable with afixed weight percentage of kenaffibre.The process of modifying the naturalfibre in terms of size might increase the dispersion of kenaffibre in the polymer matrix and increase the adhesion bonding between thefibre and matrix of composites,subsequently improving the interfacial bonding between these two phases.In this paper,the effect offibre size was evaluated by performing the mechanical test,Scanning Electron Micrograph(SEM)to observe the morphology of the composites,and also by surface analysis.The surface roughness was visualised using a 3D profilometer and thefigure was illustrated as colour shading in the image.The composite withfibre size≤100μm displayed better tensile andflexural strength,compared to other sizes.In conclusion,by reducing the size of thefibre,the composites could develop high strength performance for industrial applications.
基金
The result was obtained through the financial support of the Ministry of Education Malaysia under Grant Number RACER/2019/FKM-CARE/F00408
This paper’s publication also funded by UTeM Incentive Jurnal Q00049/JURNAL/2020/FKM.
