摘要
为缩短系统指令平均响应时间,基于虚拟仿真技术设计了一种大学生化实验系统。先构建识别读写器,将其接入射频前端模块电路中与CMU控制板建立关联。然后建立虚拟仿真生化实验管理指令集群,采用多层级的方式完成多层级虚拟仿真生化实验功能模块的组建,最后将其与虚拟仿真实验自适应数据库搭接,完成系统设计。测试结果表明:设计系统指令平均响应时间小于0.3 s,证明系统反馈速度较快,具有实际应用价值。
To shorten the average response time of system instructions,a university biochemical experimental system was designed based on virtual simulation technology.Firstly,build an identification reader and connect it to the RF front-end module circuit to establish an association with the CMU control board.Then,a virtual simulation biochemical experiment management instruction cluster is established,and the multi-level virtual simulation biochemical experiment functional modules are constructed using a multi-level approach.Finally,they are connected to the virtual simulation experiment adaptive database to complete the system design.The test results indicate that the average response time of the designed system instructions is less than 0.3 seconds,proving that the system has a fast feedback speed and practical application value.
作者
牛丽伟
Niu Liwei(Medical College of Jinzhou Medical University,Jinzhou,China)
出处
《科学技术创新》
2023年第18期99-102,共4页
Scientific and Technological Innovation
关键词
虚拟仿真技术
生化实验室
实验系统设计
virtual simulation technology
biochemical laboratory
experimental system design