期刊文献+

船载氢系统加氢过程中储氢量影响温度的研究

Study on the influence of hydrogen storage on temperature in the process of hydrogenation of shipborne hydrogen system
下载PDF
导出
摘要 对以用压缩氢气铝内胆复合材料缠绕气瓶(三型瓶)为储氢装置的船载氢系统加注过程中影响温升的因素进行分析,并通过对不同储氢容量的氢系统进行充氢试验,分析船载氢系统储氢量对气瓶温度影响。结果表明,氢系统储罐内气体升压越快,气体温升越快,从而推导出加注流量一定的条件下储氢量(加注量)越大,瓶内气体升压越慢,温升越慢。 This paper analyzes the factors that affect the temperature rise during the filling process of the shipboard hydrogen system with the compressed hydrogen aluminum liner composite wrapped cylinder(Type-III cylinder)as the hydrogen storage device,and analyzes the influence of the hydrogen storage capacity of the shipboard hydrogen system on the cylinder temperature through the hydrogen filling test of the hydrogen systems with different hydrogen storage capacities.The results show that the faster the gas pressure in the tank of the hydrogen system rises,the faster the gas temperature rises.It can be deduced that the larger the hydrogen storage capacity(filling capacity)is,the slower the gas pressure in the cylinder rises and the slower the temperature rises under the condition of a certain filling flow.
作者 任圣哲 Ren Shengzhe(Beijing PERIC Hydrogen Technologies Co.,Beijing 100192,China;The 718th Research Institute of CSSC,Handan(PERIC),056004,Hebei,China)
出处 《船电技术》 2023年第7期42-45,共4页 Marine Electric & Electronic Engineering
基金 氢燃料动力船舶关键技术研究(MC-202023-C11)。
关键词 船载氢系统 加氢过程 三型瓶 Shipborne hydrogen system Hydrogenation process Type-III cylinder
  • 相关文献

参考文献1

二级参考文献9

  • 1Eihusen J A. Application of plastic-lined composite pres-sure vessels for hydrogen storage [ R ]. General Dynamics Armament and Technical Products, 2002.
  • 2Liss W E, Richards M E, Kountz K, et al. Development and validation testing of hydrogen fast-filling fueling algo- rithms[ R~. Hydrogen Energy Systems Center, Gas Tech- nology Institute, 2003.
  • 3Werlen E, Barral K, Renault P. Thermal effects related to H2 fast filling in high pressure vessels depending on vessels type and filling procedures: Modeling, trials and studie [ A ]. European, Energy Conference [ C ], Grenoble France, 2003.
  • 4Perret C. Modeling and simulation of the filling of a gase- ous hydrogen tank under very high pressure[ R]. EIHP2- 00-00111 , 2004.
  • 5伊藤裕一,田村防介,三石洋之,等.自勤卓用压缩水素容器の急速充填における容器内温度举勤:第1报[J].自勤卓研究,2006,28(7):25-29.
  • 6伊藤裕一,田村阳介,三石洋之,等.自动车用压缩水素容器への急速充填の数值解析[J].自动车研究,2006,28(7):2932.
  • 7Dicken C J B, Merida W. Measured effects of filling time and initial mass on the temperature distribution within a hydrogen cylinder during refueling [ J ]. Journal of Power Sources, 2007, 165(1): 324-556.
  • 8U.S. Department of Commerce. National institute of standards and technology [ DB/OL ]. http://webbook. hist. gov/chemistry, 2011.08.10.
  • 9GB50516-2010,氢气加氢站技术规范[S].

共引文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部