缺口导流期碾压混凝土坝智能通水温控

Intelligent cooling control of roller-compacted concrete dam during dam gap diversion

碾压混凝土坝在施工汛期采用的坝体预留缺口与导流洞联合导流方式是一种具有经济性和高效率的施工组织形式,但在炎热气候下碾压混凝土坝预留缺口导流对大坝温度和应力影响较大,坝体导流缺口温控难度大、开裂风险高。该文依托东非装机容量最大的水电项目坦桑尼亚Julius Nyerere水电站,首先采用三维有限元法对不同通水冷却方案工况下的坝体温度场和应力场演化特性开展模拟研究,提出过水温控策略;其次提出智能通水温控方法,研发成套的联控系统,实现大坝混凝土温度演化控制;最后成功在过水前使大坝混凝土温度降低至目标温度,汛后检查中未发现温度裂缝。该研究成果对指导碾压混凝土坝安全度汛具有重要意义,可供同类工程参考。

Diverting flood via a dam gap or diversion tunnel is an economical and efficient method for the construction of a roller-compacted concrete(RCC)dam during the flood season.However,in the tropical climate of Africa,dam-gap diversion has a great influence on the dam temperature and stress field,which increases the risk of surface cracking.This paper analyzes dam temperature and stress evolution characteristics in high-temperature climatic conditions in tropical areas and develops a method for dam-gap intelligent temperature monitoring and feedback control.Relying on the Nyerere hydropower project,which has the largest installed capacity in East Africa,this paper adopts simulation,equipment development,and field application methods.A three-dimensional finite element model of the Nyerere hydroelectric dam during construction was established.The simulation boundary conditions were determined by the measured dam and river water temperatures.The dam gap concrete temperature and stress field were simulated under water pipe cooling conditions lasting for 0,7,14,and 21 d after pouring.After water pipe cooling,in the dam's elevation(EL)77.0—95.0 m area,the temperature of the overwater surface concrete was not affected remarkably,but the internal temperature of the dam was remarkably reduced.The tensile stress on the overwater surface of the dam gap increased rapidly within a few days after the start of dam-gap diversion.The tensile stress continued to increase gradually and reached a peak at the end of the dam gap diversion.Furthermore,the self-developed intelligent temperature control system 2.0 was used to monitor and control dam body temperature throughout the dam-gap diversion period and to dynamically adjust the cooling strategy.The main findings were as follows:(1)This article revealed the temperature and stress field evolution characteristics of the dam under different water cooling schemes during the dam-gap diversion stage.A large temperature gradient was generated in the area within 3 m of the overwater surface.The maximum surface temperature stress without water cooling measures reached 2.04 MPa,which exceeded the allowable tensile stress.The risk of cracking could be effectively reduced by reducing the internal temperature of the dam.(2)An intelligent temperature control strategy for hot climate conditions was proposed.It is recommended that the EL 77.0—95.0 m area of the dam was water pipe cooled for at least 7 d and that the temperature at 2 m below the water crossing surface was cooled to<34.0℃before dam-gap diversion.(3)An intelligent cooling control system 2.0 was developed.This system could intelligently regulate the cooling water temperature and flow supply and change the cooling water flow direction at regular intervals.It could effectively improve the concrete cooling effect,reduce the cooling energy consumption,and cool the dam temperature to the target temperature range before dam-gap diversion.The post-flood inspection detected no temperature cracks.It is indicated that the combination of temperature control simulation and the intelligent cooling control system 2.0 can effectively solve the temperature cracking problem in dam gaps.The study is of great significance for preventing RCC dam gaps from temperature cracks and can be used as a reference point for similar projects.