摘要
针对山寨煤矿25031工作面切眼底板底鼓破坏造成的裂隙引起甲烷有害气体溢出及裂隙水突然释放造成有害气体危害,对甲烷等有害气体和底鼓裂隙的防治方法进行了研究与分析。采用巷道底鼓治理、封闭技术、Y型通风和瓦斯抽采消除瓦斯积聚,加强巷道底鼓治理。在一系列措施下,巷道综合治理后瓦斯浓度稳定在0.1%以下,工作面未发生瓦斯超限事故。
A study and analysis were conducted on the prevention and control methods for methane and other harmful gases,as well as the damage caused by the bottom bulge of the cutting floor plate in the 25031 working face of Shanzhai Coal Mine,which caused methane harmful gas overflow and the sudden release of crack water,causing harmful gas hazards.Adopting roadway floor heave control,sealing technology,Y-shaped ventilation,and gas extraction to eliminate gas accumulation,and strengthening roadway floor heave control.Under a series of measures,the gas concentration stabilized below 0.1%after comprehensive treatment of the roadway,and there were no gas exceeding limit accidents in the working face.
作者
路广安
Lu Guang'an(Huating Coal Industry Group Co.,Ltd.,Shanzhai Coal Mine,Gansu Pingliang 744112)
出处
《山东煤炭科技》
2023年第7期136-138,共3页
Shandong Coal Science and Technology
关键词
巷道底鼓
瓦斯溢出
密封技术
Y型通风
roadway heaving floor
gas spillover
sealing technology
Y shaped ventilation