摘要
GPS定位技术测量精度高、效率高,广泛应用于控制测量中,各种型号的GPS接收机的测量数据一般使用其随机所带的商用平差软件进行平差计算,但均与现行的《全球定位系统(GPS)测量规范》相关要求存在不一致的情况。本文结合实际测量案例,从GPS控制网平差入手,探讨分析商用GPS平差软件计算结果在数据质量检核方面与国家标准要求不一致之处,并提出合理的解决方案。
GPS positioning technology has high measurement accuracy and efficiency,and is widely used in control measurement.The measurement data of GPS receivers of various models are generally calculated by commercial adjustment software,which is carried with it.However,there is inconsistency in the relevant requirements of the current GPS Measurement Specification.In this paper,combined with the actual measurement cases,starting with GPS control network adjustment,the author discusses and analyzes the inconsistency between the calculation results of commercial GPS adjustment software and the national standard requirements in data quality inspection,and puts forward reasonable solutions.
作者
张祖干
ZHANG Zugan(The Third Institute of Surveying and Mapping of Anhui Province,Hefei 230601,China)
出处
《测绘与空间地理信息》
2023年第8期103-105,共3页
Geomatics & Spatial Information Technology
关键词
GPS控制测量
参数设置
平差软件
基线解算
精度分析
GPS control survey
parameter setting
adjustment software
baseline solution
accuracy analysis