摘要
归纳总结了3种J积分测试方法,即卸载柔度法、规则化法和S_(pb)分离参数法测量断裂韧性的原理,并针对某金属材料分别采用3种方法进行了对比测试.发现3种方法均可以获得有效的JIC值,由卸载柔度法得到的J_(IC)值最大,由规则化法得到的J_(IC)值最小,但与S_(pb)分离参数法较为接近.
The theories of fracture toughness measurement for three J-integral test methods,including unloading compliance method,normalization method and S_(pb) separation parameter method,are summarized,and the three methods are used to test the fracture toughness of a metal material.It is found that all the three methods can obtain effective J_(IC) values.The J_(IC) value obtained by the unloading compliance method is slightly greater than those obtained by the other two methods,and the result obtained by the normalization method is slightly smaller than those obtained by the other two methods but close to that by the S_(pb) separation parameter method.
作者
王永东
包陈
宁冬
王谊清
景益
浦承皓
WANG Yongdong;BAO Chen;NING Dong;WANG Yiqing;JING Yi;PU Chenghao(Shanghai Nuclear Engineering Research and Design Institute Co.,Ltd.,Shanghai 200233,China;Southwest Jiaotong University,Chengdu 610031,Sichuan,China;Nuclear and Radiation Safety Center of the Ministry of Ecological Environment,Beijing 100082,China)
出处
《上海大学学报(自然科学版)》
CAS
CSCD
北大核心
2023年第4期786-795,共10页
Journal of Shanghai University:Natural Science Edition
基金
国家科技重大专项资助项目(2018ZX06004002)。
关键词
断裂韧性
阻力曲线
有效性判定
fracture toughness
resistance curve
validity judgment