摘要
为实现四粉针同轴送粉模式下粉束空间质量分布密度的全参数化准确预测,本文建立了粉束空间质量分布密度的全参数化理论计算数学模型,并提出了一种简易的实验检测方法。理论计算与实验检测结果表明:计算结果与实验结果的变化趋势完全一致,在离焦量为0时,计算结果与实验结果高度吻合(接近100%),验证了所建模型的准确性和有效性。
In order to achieve the accurate spatial mass distribution density of powder stream for laser additive manufacturing with co-axial four powder injection nozzle, this paper established the full parametric mathematical model of spatial mass distribution density of powder stream, and proposed a simple experimental detection method. The results of theoretical calculations and experimental tests show that the calculated results are in complete agreement with the trend of the experimental results, and the calculated results are in high agreement (almost 100%) with the experimental results in the case of DL = 0, which verifies the accuracy and validity of the proposed model.
作者
王军华
许俊飞
路妍
彭建军
李东林
颉潭成
WANG Junhua;XU Junfei;LU Yan;PENG Jianjun;LI Donglina;XIE Tancheng(School of Mechanics Engineering,Henan University of Science and Technology,Luoyang 471023,China;Materials Science and Engineering School,Henan University of Science and Technology,Luoyang 471023,China;Henan Intelligent Manufacturing Equipment Engineering Technology Research Center,Luoyang 471003,China;Henan Engineering Laboratory of Intelligent Numerical Control Equipment,Luoyang 471003,China)
出处
《河南科技大学学报（自然科学版）》
CAS
北大核心
2023年第6期26-35,M0003,M0004,共12页
Journal of Henan University of Science And Technology:Natural Science
基金
国家自然科学基金项目(52105054)
国家重点研发计划(2022YFF1101600)
河南省科技攻关项目(222102220073)
河南省科技研发计划联合基金(222103810039,222103810030)
河南省高等学校重点科研项目(22A460014,20A460012)
高端装备界面科学与技术全国重点实验室开放基金(SKLTKF22B12)。
关键词
激光熔覆
空间质量分布密度
粉束
同轴送粉
laser cladding
spatial mass distribution density
powder stream
co-axial powder injection nozzle
