摘要
目的:解决现有番茄加工生产线DELTA机器人在番茄分选过程中存在的效率低和运动稳定性差等问题。方法:在对DELTA机器人分选系统进行分析的基础上,将回旋线优化的门字形轨迹用于DELTA机器人轨迹规划。利用回旋线替换门字形轨迹的直角部分,建立以时间最优为目标的优化模型,通过改进的蚁群优化算法求解优化后门字形轨迹参数。通过试验对其性能进行分析。结果:所提方法相比于门字形轨迹和文献[20]方法具有更优的平均分选时间和分选成功率,平均分选时间分别降低了11.61%和1.63%,分选成功率提高了2.05%和0.56%。结论:所提规划方法有效提高了DELTA机器人分选精度和效率。
Objective:To solve the problems of low efficiency and poor motion stability of DELTA robots in the tomato sorting process of existing tomato processing production lines.Methods:Based on the analysis of the DELTA robot sorting system,the optimized gate shaped trajectory of the cyclotron was used for DELTA robot trajectory planning.By replacing the right angle part of the gate shaped trajectory with a convolutional line,an optimization model with the goal of time optimization was established.The optimized parameters of the gate shaped trajectory were solved using an improved ant colony optimization algorithm.Analyzed its performance through experiments.Results:The proposed method had better average sorting time and sorting success rate compared to the gate shaped trajectory and other methods,with an average sorting time reduction of 11.61%and 1.63%,respectively,and a sorting success rate increase of 2.05%and 0.56%.Conclusion:The proposed planning method effectively improves the sorting accuracy and efficiency of DELTA robots.
作者
封燕芳
吴必瑞
赵倩
FENG Yanfang;WU Birui;ZHAO Qian(Zhejiang Institute of Mechanical&Electrical Engineering,Hangzhou,Zhejiang 310053,China;Ningde Normal University,Ningde,Fujian 352100,China;Fuzhou University,Fuzhou,Fujian 350108,China)
出处
《食品与机械》
CSCD
北大核心
2023年第8期71-75,154,共6页
Food and Machinery
基金
福建省自然科学基金项目(编号:2020J01429)
宁德师范学院专项科研基金(编号:2019ZX402)。
关键词
DELTA机器人
番茄分选
加工生产线
门字形轨迹
蚁群优化算法
时间最优
DELTA robot
tomato sorting
processing production line
gate shaped trajectory
ant colony optimization algorithm
time optimal