医疗废物高温蒸煮后废气处理技术

Technology of Waste Gas Treatment after High Temperature Cooking of Medical Waste

随着中国医疗事业的不断发展,医疗废物产生量也不断增多,尤其在一些传染性疾病集中爆发后,定点医院、隔离点、发热门诊等所产生的医疗废弃物激增,如不能对这些医疗废物进行科学的处理处置,很可能引起二次疾病传播或相关公共卫生问题。现阶段现有的医疗废物主流处理方法有高温蒸煮处置技术和热解焚烧技术,其中高温蒸煮处置技术在我国医疗废物的处置中应用较为广泛。但在高温蒸煮过程中会产生大量废气,这些废气若没有进行及时地处理,很可能对环境质量造成一定的影响,因此文章对医疗废物高温蒸煮过程中产生的废气的处理技术进行了研究。

With the continuous development of China’s medical industry,the amount of medical waste is also increasing,especially after some infectious disease outbreaks,the amount of medical waste generated by designated hospitals,isolation points,fever clinics and so on has exploded.If these medical waste cannot be treated and disposed scientif ically,it may cause the secondary spread of diseases or related public health problems.At present,the main treatment methods of medical waste are high temperature cooking treatment technology and pyrolysis incineration technology.Among them,the high temperature cooking disposal technology is widely used in our country’s medical waste disposal.However,in the process of high temperature cooking will produce a lot of waste gas,if the waste gas is not treated in time,it is likely to have a certain impact on environmental quality.Therefore,this paper studies the treatment technology of waste gas produced in the process of high temperature cooking of medical waste.