基于Revit二次开发技术的变电站算量系统

Substation calculation system based on Revit secondary development technology

针对传统算量系统存在的高成本和响应慢等问题,提出了一种适应于现代精细化成本管控的精度与速度相结合的变电站算量系统.通过修改变电站算量系统的具体流程,设计了基于Revit技术的系统总体框架、环境和界面等功能模块,编辑接收数据量的核心代码,解决了输出工程量的关键性技术难题.仿真测试结果表明,该设计系统整体逻辑架构稳定、功能分类清晰明确,且具备高处理的容错能力,与传统算量系统相比,变电站算量系统的软件响应时间和成本评估准确率均得到了较大的优化.

Aiming at the problems of high cost and slow response in traditional calculation system,a precision calculation system for modern fine-cost-control of substation was proposed.By modifying the specific process of substation calculation system,the overall framework,environment and interface of the system based on the technology of Revit were designed,and the core code of receiving data was edited,and the key technical problems of output engineering quantities were solved.The simulation test results show that the overall logic architecture of the as-designed system is stable,the function classification is clear,and the as-designed system has high processing fault tolerance.Compared with the traditional calculation system,the software response time and the cost evaluation accuracy of this substation calculation system are all optimized.