摘要
采用聚碳酸酯二醇(PCDL1000)与异佛尔酮二异氰酸酯(IPDI)为主要原料制备水性聚氨酯乳液,通过球磨分散填充氧化改性N115炭黑,制得形状记忆水性聚氨酯复合胶膜,表征并测试其形貌结构、热性能、力学性能及形状记忆性能。研究结果表明:制备的炭黑填充形状记忆聚氨酯胶膜具有分散性好、热稳定性好(热解温度约350℃)、玻璃化转变温度低(约-5℃)、高拉伸强度(约40MPa)和优异的形状记忆性能。
Polycarbonate glycol(PCDL1000)and isophorone di-isocyanate(IPDI)were adopted to prepare waterborne polyurethane lotion,which was filled with oxidation-modified N115 carbon black by the ball-milling dispersion.Waterborne polyurethane films with shape memory were obtained and their properties were then analyzed,including morphological structure,thermal,mechanical,and shape memory properties.According to research results,prepared carbon black-filled shape memory polyurethane films exhibit good dispersibility,high thermal stability(350℃of pyrolysis temperature),low glass transition temperature(about-5℃),high tensile strength(about 40 MPa),and excellent shape memory behaviors.
作者
宋莹
李琳
陈建
Song Ying;Li Lin;Chen Jian(College of Material Science and Engineering,Sichuan University of Science and Engineering,Sichuan Zigong 643000,China;Vanadium and Titanium Resource Comprehensive Utilization Key Laboratory of Sichuan Province,Sichuan Panzhihua 617000,China)
出处
《炭素技术》
CAS
北大核心
2023年第4期9-13,38,共6页
Carbon Techniques
基金
国家自然科学基金项目(52272042)
钒钛资源综合利用四川省重点实验室项目(2022FTSZ15)。
关键词
氧化改性炭黑
形状记忆
水性聚氨酯胶膜
炭黑填充
Oxidized carbon black
shape memory polymer
waterborne polyurethane film
carbon black-flling
