期刊文献+

徐州地铁钢轨非对称打磨工艺的应用及成效分析

Application and effect analysis of asymmetric grinding technology for rail of Xuzhou metro
原文传递
导出
摘要 文章分析了徐州地铁1号线子房山—铜山路下行小半径曲线钢轨波磨等病害现状,并对轮轨关系进行了研究分析,深入探讨了钢轨非对称打磨工艺的原理及打磨模式制定的思路。打磨后通过对曲线多项数据的观测对比,总结出钢轨非对称打磨工艺能够有效缓解小半径曲线钢轨病害,改善轮轨关系,为城市轨道交通小半径曲线钢轨病害的治理提供了技术支撑。
作者 范信 AN Xin
出处 《轨道交通装备与技术》 2023年第5期40-44,共5页 Rail Transportation Equipment and Technology
  • 引文网络
  • 相关文献

参考文献4

二级参考文献29

  • 1周清跃,田常海,张银花,刘丰收,陈朝阳,俞喆.高速铁路钢轨打磨关键技术研究[J].中国铁道科学,2012,33(2):66-70. 被引量:102
  • 2倪平涛,王开文,张卫华,池茂儒.轮轨接触关系计算方法[J].交通运输工程学报,2006,6(4):10-13. 被引量:21
  • 3Eckhard Scheunemann,吴新民(译) 刘新明(校) 李德领(校).轮/轨几何学(待续)——轨道车辆与线路的共同课题[J].国外铁道车辆,2007,44(2):21-27. 被引量:7
  • 4Eckhard Scheunemann,吴新民(译) 刘新明(校) 李德领(校).轮/轨几何学(续完)——轨道车辆与线路的共同课题[J].国外铁道车辆,2007,44(3):16-21. 被引量:2
  • 5[1]Zarembski A M. On the benefits of rail maintenance grinding[R]. AREA Bulletin,760.
  • 6[2]Butler R W,et al. Criteria for rail grinding[A]. Report of special committee No. 3,Proceedings of the Roadmasters and Maintenance of Way Association, 93rdAnnual Conference[R]. September 1981.
  • 7[3]Zarembski A M The evolution and application of rail profile grindings [R], AREA Bulletin, 718.1988.
  • 8[4]Rail Grinding Equipment :Traditional and Modern [M].Speno Rail Serivces,Technical Notes No. 7,1986.
  • 9[5]童大埙.铁路轨道[M].中国铁道出版社,1990.
  • 10LAMSON S T, LONGSON B H. Development of rail profile grinding at Hamersley iron [ C ]//Proceedings of 2nd International Heavy Haul Railway Conference. Colorado: Springs, 1982 : 372-379.

共引文献238

;
使用帮助 返回顶部