摘要
NUBRS曲面建模技术是专为曲面复杂物体三维模型重建而设计的,能基于曲线和曲面的形式对目标地物三维模型的轮廓和外形进行准确精细的表达。本文介绍了一款基于NURBS曲面的船体三维建模程序Maxsurf Modeler,详细论述了应用该程序进行船体三维建模的流程;同时,对三维模型的可靠性和适用性进行了CFD验证。在静水阻力计算中,6种工况下的最大误差为2.29%;在耐波性计算中,纵摇运动的计算误差最大,为19.32%。结果表明,采用Maxsurf Modeler完成的三维模型具有一定的可靠性。
NUBRS surface modeling technology is specially designed for the reconstruction of 3D models of complex surface objects.It can accurately and precisely express the contour and shape of the 3D model of target objects based on the form of curves and surfaces.This paper introduces Maxsurf Modeler,a 3D modeling program of hull based on NURBS surface,and gives the process of applying this program to 3D modeling of hull.At the same time,the reliability and applicability of the 3D model are verified by CFD.In the calculation of hydrostatic resistance,the maximum error under 6 working conditions is 2.29%.In seakeeping calculation,the calculation error of pitch motion is the largest,which is 19.32%.The results show that the 3D model completed by Maxsurf Modeler has certain reliability.
作者
张大朋
严谨
赵博文
周楠
朱克强
ZHANG Dapeng;YAN Jin;ZHAO Bowen;HOU Ling;ZHU Keqiang(Ship and Maritime College,Guangdong Ocean University,Zhanjiang 524088,Guangdong,China;Ocean College Zhejiang University,Zhoushan 316021,Zhejiang,China;Harbin Engineering University Qingdao Innovation and Development Base,Qingdao 266000,Shandong,China;Faculty of Maritime and Transportation,Ningbo University,Ningbo 315211,Zhejiang,China)
出处
《海洋工程装备与技术》
2023年第3期24-32,共9页
Ocean Engineering Equipment and Technology
基金
广东海洋大学科研启动经费资助项目(060302072101)
湛江市科技局青年海洋人才资助项目海底管线平管起吊的对比研究与优化(2021E05011)
广东省促进经济高质量发展专项“深海油田高可靠智能开采技术研发及产业化项目”(粤融办函[2020]161号)
广东省促进经济高质量发展专项资金(海洋经济发展)“复杂井筒多相流动安全保障技术研发”(GDARC[2021]56)。