摘要
为了在车载RGB-LED颜色一致性校准算法中减少时间成本,并能更便捷地分析数据,开发了一种基于模块化的颜色参数校准实验系统。该系统面向汽车电子应用,结合伺服电动机、光电探头和颜色分析仪,通过LIN总线并使用PWM调光方法驱动RGB点亮;分析了RGB-LED混光原理和电流对RGB-LED亮度的影响;展示了校准后各种颜色的CIE坐标图以及校准时间图。经RGB-LED颜色标定实验测试,实现了RGB-LED的高精度颜色校准并具有较快的校准速度,同时实现了数据的采集和数据源的可追溯功能。
In order to reduce the time cost consumed by repetitive work and to analyze the data more conveniently during the research of color consistency calibration algorithm for RGB-LEDs,a color parameter calibration experimental system based on modular design is developed.The system combines a servo motor,a photoelectric probe and a color analyzer to drive RGB lighting through LIN bus communication and PWM dimming method.The results of RGB-LED color calibration experimental test show that the RGB-LED can be calibrated with high accuracy and fast calibration speed,and the data acquisition and data source traceability can be achieved.
作者
万志翀
陈岚
万国春
谢丽宇
WAN Zhichong;CHEN Lan;WAN Guochun;XIE Liyu(School of Electrical and Electronic Engineering,Shanghai Institute of Technology,Shanghai 201418,China;School of Electronics and Information Engineering,Tongji University,Shanghai 201804,China;College of Civil Engineering,Tongji University,Shanghai 200092,China)
出处
《实验室研究与探索》
CAS
北大核心
2023年第7期7-11,共5页
Research and Exploration In Laboratory
基金
国家自然科学基金项目(52078375)
上海市高校市级重点课程建设项目(202134)。
关键词
红绿蓝发光二极管
自动化系统
颜色标定
LIN总线
red-green-blue ligt emitting diode(RGB-LED)
automated systems
color calibration
LIN bus