摘要
利用多组元合金替代Co作黏结相可以提高硬质合金综合性能。本文从黏结相成分、合金组织与性能等方面较系统的综述了近年来利用多组元合金作黏结相制备WC基硬质合金的研究进展。分析了多组元合金替代后黏结相的相变行为,以及WC/多组元合金界面对硬质合金力学性能的影响,提出其影响机理为位错滑移条件的改变。
The comprehensive performance of cemented carbide can be improved by using a multi-component alloy instead of Co as the binder phase.In this paper,the research progress of WC-based cemented carbide prepared by using multicomponent alloy as a binder phase in recent years was systematically reviewed from the aspects of binder phase composition,alloy structure,and properties.The phase transformation behavior of the binder phase after multi-component alloy substitution and the influence of WC/multi-component alloy interface on the mechanical properties of cemented carbide were analyzed.It was proposed that the influence mechanism was the change of dislocation slip condition.
作者
郭克星
高杰
房世超
Guo Kexing;Gao Jie;Fang Shichao(Baoji Petroleum Steel Pipe Co.,Ltd.,Baoji Shaanxi,721008,China;Shaanxi Special Equipment Inspection and Testing Institute,Xi’an Shaanxi 710000,China)
出处
《硬质合金》
CAS
2023年第5期406-412,共7页
Cemented Carbides
基金
国家重点研发计划(2017YFB0304903)
国家重点研发计划项目(2018YFC0310300)
中国石油天然气股份有限公司科学研究与技术开发项目(2021ZZ01)。
关键词
多组元黏结相
WC基硬质合金
力学性能
高温氧化性能
multi-component binder phase
WC-based cemented carbide
mechanical properties
high-temperature oxidation performance