盾构滚刀刀圈在中硬岩地层中的针对性措施分析
Analysis of Targeted Measures of Shield Hob Ring in Medium and Hard Rock Formation
摘要
针对滚刀在中硬岩地层中掘进时,刀圈作为直接接触掌子面的零件,经常出现崩刃、断裂、不耐磨等过早失效的问题,通过对刀圈轮廓尺寸和刀圈刃形采取针对性措施的分析,希望能够在延长滚刀刀圈使用寿命方面提供可行的依据和参考,从而达到提高破岩效率、减少滚刀更换频次的目的.
作者
刘君
孙盼盼
LIU Jun;SUN Panpan
出处
《建筑机械化》
2023年第10期29-31,共3页
Construction Mechanization
参考文献3
-
1段文军,张蒙祺,勾斌,莫继良,周仲荣.刃形对硬岩地层中TBM滚刀磨损行为的影响研究[J].摩擦学学报,2023,43(7):738-749. 被引量:3
-
2宋克志,袁大军,王梦恕.盘形滚刀与岩石相互作用研究综述[J].铁道工程学报,2005,22(6):66-69. 被引量:45
-
3张厚美.盾构盘形滚刀损坏机理的力学分析与应用[J].现代隧道技术,2011,48(1):61-65. 被引量:31
二级参考文献23
-
1龚秋明,赵坚,张喜虎.岩石隧道掘进机的施工预测模型[J].岩石力学与工程学报,2004,23(z2):4709-4714. 被引量:42
-
2竺维彬,王晖,鞠世健.复合地层中盾构滚刀磨损原因分析及对策[J].现代隧道技术,2006,43(4):72-76. 被引量:79
-
3Rostami, J. 1991, "Design Optimization, Performance Prediction, and the Economic Analysis of TBM Application for the Construction of Proposed Yucca Mountain Nuclear Waste Repository". Thesis # 3941, Colorado School of Mines.
-
4Roxborough F.F., Phillips H.R., 1975, "Rock Excavation by Disc Cutter", Int. J. of Rock Mech. &Mining Sci. & Geomech. Abs., V.12, pp 361.
-
5Sanio H.P., 1985, "Prediction of the Performance of Disc Cutters in Anisotropic Rock", Int. J. of Rock Mech. &Mining Sci. & Geomech. Abs., V.22, No.3, pp153-161.
-
6J. Rostami, L. Ozdemir, and B. Nilson, " Comparison Between CSM and NTH Hard Rock TBM Performance Prediction Models", ISDT, LAS VEGAS NV, (1996).
-
7张厚美.TBM的掘进性能预测模型研究[C]//田中弘.第三届中日盾构隧道技术交流会论文集.日本东京:早稻田大学井深大纪念厅国际会议中心,2005,322-332.
-
8Richard Edward Gertsch.Rock toughness and disc cutting[D].University of Missouri-Rolla,2000.
-
9Teale,R..The Concept of Specific Energy in Rock Drilling[J].Int.J.Rock Mech.Min.Sci.& Geomech Abstr.2,1965:57-73.
-
10Paul,B.and D.L.Sikarskie.A Preliminary Theory of Static Penetration of a Rigid Wedge into a Brittle Material[J].Transactions of the Society of Mining Engineers,AIME,New York,NY 232,1965:372-383.
共引文献76
-
1茹华莎.基于t-SNE流形学习的盾构刀盘施工磨损后性能评估[J].工程机械文摘,2024(2):53-55.
-
2罗华.基于TBM施工的隧道岩石耐磨性与莫氏硬度的关系研究[J].公路交通科技(应用技术版),2010,6(5):205-207. 被引量:4
-
3刘志杰,滕弘飞,史彦军,杨光辉.TBM刀盘设计若干关键技术[J].中国机械工程,2008,19(16):1980-1985. 被引量:40
-
4谭青,屠昌锋,暨智勇,夏毅敏.盘形滚刀切割岩石的数值仿真[J].现代制造工程,2009(2):62-64. 被引量:15
-
5苏鹏程,王宛山,霍军周,李震.TBM的滚刀布置优化设计研究[J].东北大学学报(自然科学版),2010,31(6):877-881. 被引量:18
-
6石元奇,杨磊,庄欠伟.成都地铁盾构刀盘刀具的磨损和改进方法[J].上海建设科技,2010(5):24-25. 被引量:1
-
7宋克志,王梦恕.TBM刀盘与岩石相对刚度对盘形滚刀受力的影响分析[J].应用基础与工程科学学报,2011,19(4):591-599. 被引量:13
-
8隋艳红,金瑞田.中药的经验鉴别举例[J].中医药信息,2000,17(2):15-15. 被引量:1
-
9夏毅敏,欧阳涛,陈雷,罗德志,张新明.盘形滚刀破岩力影响因素研究[J].应用基础与工程科学学报,2012,20(3):500-507. 被引量:27
-
10许志勇,高明忠,李文成.大型地下洞室盾构掘进施工特性分析[J].四川水力发电,2012,31(6):62-65.
-
1但昭旺,冯帆,李辉,许骉,宋建伟,陈靖超.硬岩地层中滚刀失效分析及适应性选型方法[J].中国铁路,2021(10):138-145.
-
2支龙,杨景,周凡.全断面隧道掘进机滚刀刀圈探究[J].热加工工艺,2023,52(12):144-146.
-
3高亚楠,王云龙,张垚,蔚立元,邵晓爽,张广凯.基于连续-离散方法的微波照射下花岗岩力学行为与破裂特征[J].煤炭学报,2023,48(2):693-713. 被引量:2
-
4段文军,张蒙祺,勾斌,莫继良,周仲荣.刃形对硬岩地层中TBM滚刀磨损行为的影响研究[J].摩擦学学报,2023,43(7):738-749. 被引量:3
-
5祝效华,何灵,刘伟吉,罗云旭,阳飞龙.粒子冲击及其辅助钻齿破岩规律研究[J].西南石油大学学报(自然科学版),2023,45(5):152-163. 被引量:1
-
6袁若飞,吴泽兵,张文溪.可伸缩仿生聚晶金刚石复合片钻头[J].石油钻采工艺,2023,45(3):296-306. 被引量:1
-
7李勇,董仕明,姚建林.锥形PDC齿单齿破岩有限元仿真研究[J].石油和化工设备,2023,26(10):33-36.
-
8黄才华.含节理岩体对隧道爆破开挖的影响[J].铁道建筑技术,2023(10):184-186. 被引量:2
-
9王立国,曲天威,曲松,杨秀娟.影响逆变器供电驱动装置轴承可靠性的关键问题研究[J].铁道机车车辆,2023,43(5):127-134.