期刊文献+

4种方法测定聚烯烃管材和管件中的炭黑含量

Determination of carbon black content in polyolefin pipes and fittings by using four methods
下载PDF
导出
摘要 以聚乙烯(PE)粒料、管材、管件(PE100、PE80)和炭黑母料[PE、聚丙烯(PP)]为研究对象,利用传统马弗炉法、管式电炉法、热重分析法及微波马弗炉法测定不同样品中的炭黑含量,并对其测定结果进行分析,探究了4种方法对PE中炭黑含量的测量准确性。结果表明,采用热重分析法测定PE塑料中的炭黑含量时,检测结果具有较高的准确率和良好的重复性。 Taking polyethylene(PE)pellets,pipes,fittings,and carbon black masterbatch(PE,polypropylene)as research objects,the carbon black contents in different samples were determined by using traditional muffle furnace,tubular electric furnace,thermogravimetric,and microwave muffle furnace methods.The measurement results were analyzed,and the accuracy of these four methods for measuring carbon black content in polyethylene was investigated.The results indicated that thermogravimetric method had a high accuracy and good repeatability.
作者 李田华 白林 孙颖 LI Tianhua;BAI Lin;SUN Ying(School of Light Industry and Engineering,Beijing Technology and Business University,Beijing 100048,China;Institute of Plastic Processing&Application of Light Industry,Beijing 100048,China)
出处 《中国塑料》 CAS CSCD 北大核心 2023年第11期95-100,共6页 China Plastics
基金 北京市教育委员会科学研究计划项目资助(KM202210011006) 国家自然科学基金面上基金(52073004)。
关键词 炭黑含量 管式电炉法 热重分析法 carbon black content tubular electric furnace method thermogravimetric method
  • 相关文献

参考文献18

二级参考文献63

  • 1张荣炜,刘凤岐.炭黑/聚合物复合材料的研究进展[J].高分子材料科学与工程,2005,21(3):45-49. 被引量:11
  • 2李玉丰.橡胶,塑料制品中炭黑含量的测定[J].炭黑工业,1996(5):26-28. 被引量:2
  • 3全浩.标准物质及其应用技术[M].北京:中国标准出版社,1990..
  • 4吴立峰.塑料着色和色母粒实用手册[M].化学工业出版社.
  • 5GB13021-1991聚乙烯管材和管体炭黑含量测定(热失重法)[S].
  • 6ASTME1131-2008热重分析法测量高聚物的组分[S].
  • 7孙逊,谢建玲,等.GB/T13663--2000给水用聚乙烯(PE)管材[S].北京:中国标准出版社,2001:3.
  • 8马洲,王志伟,等.GB/T136632-2005给水用聚乙烯(PE)管道系统管件[S].北京:中国标准出版社,2005:3.
  • 9高立新,孙逊,等.GB155581-2003燃气用埋地聚乙烯(PE)管道系统第1部分管材[S].北京:中国标准出版社,2004:4.
  • 10马洲,王志伟,等.GB155582-2005气用埋地聚乙烯(PE)管道系统管件[S].北京:中国标准出版社,2005:5.

共引文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部