期刊文献+

聚酯增塑剂D1050对PVC防水卷材性能的影响研究 被引量:2

Effect of Polyester Plasticizer D1050 on the Properties of PVC Waterproofing Membrane
下载PDF
导出
摘要 采用聚酯增塑剂D1050制备PVC防水卷材,以50份DOP增塑剂制得的PVC防水卷材作为对照组,得出如下结论:D1050增塑剂的增塑效率是DOP增塑剂的76.9%;D1050增塑剂的用量为50份时,制得的PVC防水卷材拉伸强度、直角撕裂强度比等量DOP增塑剂制得的PVC防水卷材的高;D1050增塑剂迁移率低且主要为表面迁移,制得的PVC防水卷材质量稳定。 PVC waterproofing membrane is prepared using polyester plasticizer D1050,and PVC membrane prepared with 50 portions of DOP plasticizer are used for comparison.Following conclusions are drawn:the plasticizing efficiency of D1050 plasticizer is 76.9%of that of DOP plasticizer;When the dosage of D1050 plasticizer is 50 parts,the tensile strength and right angle tear strength of the PVC waterproofing membrane produced are higher than those of the PVC waterproofing membrane produced with the same amount of DOP plasticizer;the migration rate of D1050 plasticizer is low and mainly occurs on the surface,so the quality of PVC waterproofing membrane produced is stable.
作者 张涛 韩心强 张梦霞 Zhang Tao;Han Xinqiang;Zhang Mengxia(Hubei Jiuyang Waterproof Material Technology Co.,Ltd.,Xiangyang,Hubei 441100,China)
出处 《中国建筑防水》 2023年第11期1-5,共5页 China Building Waterproofing
关键词 PVC防水卷材 聚酯增塑剂D1050 DOP增塑剂 力学性能 迁移速率 PVC waterproofing membrane polyester plasticizer D1050 DOP plasticizer mechanical property migration rate
  • 相关文献

参考文献2

二级参考文献12

  • 1刘保成,申欣,李荣勋,李伟,丁乃秀,刘光烨.软质聚氯乙烯材料的改性研究[J].聚氯乙烯,2005,33(7):24-27. 被引量:3
  • 2于鸣,徐强,王贵友.聚氨酯型增塑剂[J].聚氨酯工业,2006,21(2):1-3. 被引量:4
  • 3齐兴国,李荣勋,丁乃秀,李超勤,李伟,刘光烨.粉末丁腈橡胶和Elvaloy在软质PVC中的应用[J].聚氯乙烯,2006,34(10):18-20. 被引量:4
  • 4熊英 陈光顺 郑少云.PVC增效和改性的研究最新进展.中国塑料,2000,(1):8-17.
  • 5龚浏澄,郑德,李杰.聚氯乙烯塑料助计与配方设计技术[M].北京:中国石油化工出版社,2007.
  • 6Roth B, Herkenrath P, Lehmann H, etal. Di-(2-ethylhexyl)- phthalate as plasticizer in PVC respiratory tubing systems: indications of hazardous effects on pulmonary function in mechanically ventilated, preterm infants[J]. Ettr. J. Pediatrics, 1988, 147: 41-46.
  • 7Oriol-Hemmerlin C, Pham Q T. Poly 1,3-butylene adipate reoplexw as high molecular weight plasticizer for PVC-based cling films- microstrueture and number-average molecular weight studied by 1H and 13C-NMR[J]. Polymer, 2000, 41: 4401-4407.
  • 8Annika L, Minna H. Migration resistant polymeric plasticizer for poly(vinyl chloride)[J]. J. Appl. Polym. Sei., 2007, 104: 2458- 2467.
  • 9Annika L, Minna H. Environmemally friendly plasticizers for poly (vinyl chloride)-improved mechanical properties and compatibility by using branched poly(butylene adipate) as a polymeric plasticizer[J]. J. Appl. Polym. Sci., 2006, 100: 2180-2188.
  • 10Klaric I, Roj E U, Braver M. Thermo oxidative degradation of poly ( vinyl chloride ) / acrylonitrile- butadiene-styrene blends [ J ]. J. Appl. Polym. Sci., 1996, 61: 1123-1129.

共引文献32

同被引文献132

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部