摘要
研究了VAE乳液添加量对Ⅰ型JS防水涂料拉伸性能和粘结强度的影响,测试了VAE乳液制得的JS防水涂料的施工抗流挂性能和长期吸水率。结果表明:液料中添加90%左右的VAE乳液、1.5%的增塑剂DINP,并添加适量的丙烯酸盐类增稠剂和杀菌剂,液粉料质量比为1∶1时,制得的JS防水涂料具有较好的力学性能、施工性能,较厚的单次涂抹厚度和较低的吸水率。
The influence of the addition amount of VAE emulsion on the tensile properties and bonding strength of TypeⅠJS waterproofing coating is studied,and the application anti-sagging performance and long-term water absorption of JS waterproofing coating prepared with VAE emulsion are tested.The results show that when 90%VAE emulsion,1.5%plasticizer DINP,appropriate amount of acrylate thickener and bactericide are added into the liquid material,and the mass ratio of liquid to powder is 1∶1,the JS waterproofing coating prepared has good mechanical properties,workability,bigger single application thickness and lower water absorption.
作者
刘金宝
王海澜
薛春来
Liu Jinbao;Wang Hailan;Xue Chunlai(Yuanda Hongyu(Tangshan)Waterproof Materials Co.,Ltd.,Tangshan,Hebei 301505,China)
出处
《中国建筑防水》
2023年第11期13-16,共4页
China Building Waterproofing
关键词
JS防水涂料
VAE乳液
DINP增塑剂
拉伸性能
粘结强度
抗流挂性
吸水率
JS waterproofing coating
VAE emulsion
DINP plasticizer
tensile property
bonding strength
anti-sagging performance
water absorption rate