摘要
Perovskite nanocrystals(PNCs)/polymer nanocomposites can combine the advantages of each other,but extremely few works can achieve the fabrication of PNCs/polymer nanocomposites by bulk polymerization.We originally adopt a two-type ligand strategy to fabricate bulk PNCs/polystyrene(PS)nanocomposites,including a new type of synthetic polymerizable ligand.The CsPbCl_(3)PNCs/PS nanocomposites show extremely high transparency even the doping content up to 5 wt%.The high transparency can be ascribed to the Rayleigh scattering as the PNCs distribute uniformly without obvious aggregation.Based on this behavior,we first exploit the potential of PNCs to serve as scatters inside light guided plate(LGP),whose surface illuminance and uniformity can be improved,and this new kind of LGP is compatible with the advanced liquid crystal display technology.Thanks to the facile composition adjustment of CsPbCl_(x)Br_(3-x)(1≤x≤3)PNCs,the Rayleigh scattering behavior can also be adjusted so as to the performance of LGP.The best-performing 5.0-inch LGP based on CsPbCl_(2.5)Br_(0.5)PNCs/PS nanocomposites shows 20.5 times higher illuminance and 1.8 times higher uniformity in display than the control.The LGP based on PNCs/PS nanocomposite exhibits an enormous potential in commercialization no matter based on itself or combined with the LGP-related technology.
基金
This work was financially supported by the National Science Foundation of China(NSFC)under Grant No.52233005.
