数控纤维缠绕机的机械机构设计研究

Design of Mechanical Mechanism of CNC Fibre Winding Machine

本文简述龙门数控纤维缠绕机第五轴机构设计方案,并对卧式缠绕机尾座机构设计方案进行总结。第五轴机构设计方案主要简述设计初期需要注意的事项,同时对第五轴驱动机构和执行机构主要零件的选型,强度的校核,位置的放置等情况进行了简述。卧式缠绕机尾座机构设计方案对以下情况进行总结:非电动尾座轴向固定总结、尾座支承设计总结、电动尾座结构形式总结。通过总结方案可以快速应对部分缠绕工艺及缠绕参数对尾座机构形式的需求。

The paper briefly describes the design scheme of the fifth axis mechanism of the gantry CNC filament winding machine and summarizes the design scheme of the tailstock mechanism of the bedroom winding machine.The design scheme of the fifth axis mechanism mainly describes the matters needing attention in the initial stage of the design,and briefly describes the selection of the main parts of the fifth axis drive mechanism and actuator,the strength check,and the placement of the position.The design scheme of the tailstock mechanism of the bedroom winding machine summarizes the following situations:the axial fixation of the non-electric Tailstock,the design of the tailstock support,and the structural form of the electric Tailstock.By summarizing the scheme,we can quickly meet the requirements of some winding processes and winding parameters on the form of tailstock mechanism.