OPM三维软件在工艺管道设计中的应用

目前,三维设计软件大都是国外产品,其自身对于工程设计及出图往往不能满足国内要求,所以项目设计前期及设计完成后出图的软件二次开发工作显得至关重要。研究BIM软件之一OPM软件绘制工艺管道的二次开发工作,并将其应用到具体的项目施工图中。应用结果表明,软件二次开发工作得当,三维出图的管道轴测图、主要设备及材料表、保温油漆清册和阀门清册满足工程标准要求,给设计者带来极大的设计便利,在保证图纸质量的同时,提高出图的效率和准确性,对后续研究数字化交付具有重要意义。

At present,the majority of three-dimensional design software are foreign products,and their own engineering design and drawing can not meet the domestic requirements.Therefore,the secondary developments of software for drawing at the early stage of project design and after the completion of design are very important.This paper studies the secondary developments of OPM software,one of BIM software,to draw process pipeline,and applies it to the specific project construction drawing.The application results show that the secondary developments of the software are proper,and the three-dimensional isometric drawing of the pipeline,the list of main equipment and materials,the list of thermal insulation paint,and the valve inventory meet the requirements of the engineering standards,which brings great design convenience to the designer,improves the efficiency and accuracy of the drawing while ensuring the quality of the drawing,and is of great significance for the follow-up research on the digital delivery.