基于STM32的智能窗帘设计

Design of Intelligent Curtain Based on STM32

随着高新技术及电子器件的发展,光控、温控及遥控窗帘应运而生,给人们的生活带来很多方便。因此,研究和设计智能窗帘控制系统具有深远的实际意义。系统设计的主控模块选取STM32F103C8T6单片机。选取串口屏SDWa043C03T作为人机交互模块,负责显示采集到的温度和湿度。选取DHT11作为湿度采集模块,热敏电阻作为温度采集模块,通过BH1750采集室内光照强度,利用HC-05作为蓝牙模块。所设计的智能窗帘成本更加经济,结构更加简单可靠,控制方式更加丰富便捷。

With the development of high and new technology and electronic devices,light control,temperature control and remote control curtains come into being,bringing much convenience to people's lives.Therefore,the research and design of an intelligent curtain control system has far-reaching practical significance.The main control module of the system design selects STM32F103C8T6 Single-Chip Microcomputer.The serial screen SDWa043C03T is selected as the human-computer interaction module,and it is responsible for displaying the collected temperature and humidity.The DHT11 is selected as the humidity acquisition module.The thermistor is selected as the temperature acquisition module.It collects the indoor light intensity by BH1750,and uses HC-05 as a Bluetooth module.The cost of the designed intelligent curtain is more economical,the structure is more simple and reliable,and the control mode is more abundant and convenient.