摘要
研究喷气涡流纺工艺(纺纱速度、喷嘴气压和导引针到锥面体入口距离)对不同混纺比亚麻/黏胶混纺纱成纱性能的影响,然后对亚麻/黏胶20/80混纺纱进行纺纱工艺参数单因子试验,通过正交试验得到最佳纺纱工艺为:纺纱速度150 m/min,喷嘴气压0.45 MPa,导引针到锥面体入口距离1 mm。
The effects of jet vortex spinning process(spinning speed,nozzle air pressure and distance from the guide needle to the inlet of the cone)on the yarn forming properties of flax/viscose blends with different blending ratios are studied.The single-factor experiment of spinning process parameters is carried out on flax/viscose(20/80)and the optimal spinning process is obtained through orthogonal experiments as follows:spinning speed is 150 m/min,nozzle air pressure is 0.45 MPa,and the distance from guide needle to cone inlet is 1 mm.
作者
樊家良
郑光明
尚珊珊
王守波
郁崇文
FAN Jialiang;ZHENG Guangming;SHANG Shanshan;WANG Shoubo;YU Chongwen(College of Textiles,Donghua University,Shanghai 201620,China;Shanghai University of Engineering Science,Shanghai 201620,China;Xinyu Xianzhi Textile Co.,Ltd.,Xinyu 336600,Jiangxi,China)
出处
《上海纺织科技》
北大核心
2023年第12期29-32,77,共5页
Shanghai Textile Science & Technology
基金
自然科学基金青年项目(52106205)
国家现代农业产业技术体系资助(CARS-16)。
关键词
喷气涡流纺
纺纱工艺
亚麻
黏胶
混纺纱
混纺比
jet vortex spinning
spinning process
linen
viscose
blended yarn
blending ratio
