摘要
为了评定冲击力校准装置下压电式力传感器动态灵敏度的不确定度,首先介绍了基于空气轴承悬浮支撑的水平式质量块冲击碰撞的校准模型。然后通过激光绝对法复现加速度,进行了不同硬度的冲击头碰撞测试,最后对力传感器的动态灵敏度参数进行测量结果不确定度评定。试验结果表明,基于激光绝对水平冲击法的力传感器灵敏度不确定度为U_(rel)=1.0%,(k=2),满足对动态力传感器的校准需求。
In order to evaluate the uncertainty of the dynamic sensitivity of piezoelectric force sensors under the impact force calibration device,a calibration model for horizontal mass block impact collision based on air bearing suspension support is first introduced.Then the acceleration is reproduced by the laser absolute method,and the impact test of the impact head with different hardness is carried out.Finally,the uncertainty of the measurement results of the dynamic sensitivity parameters of the force sensor is evaluated.The experimental results show that the sensitivity uncertainty of the force sensor based on the laser absolute horizontal impact method is U_(rel)=1.0%,(k=2),which meets the calibration requirements for dynamic force sensors.
作者
韩晓萌
王振
尹思博
冯晟顺
王潇瑛
Han Xiao-meng;Wang Zhen;Yin Si-bo;Feng Sheng-shun;Wang Xiao-ying(Shanghai Institute of Quality Inspection and Technical Research,Shanghai 201114,China)
出处
《内燃机与配件》
2024年第1期106-108,共3页
Internal Combustion Engine & Parts
关键词
灵敏度
力传感器
校准
Sensitivity
Force sensor
Calibration