摘要
以往的配电网故障快速复电技术由于没有考虑到网损,导致配电网故障快速复电技术的网损量太大,因此提出了考虑网损的配电网故障快速复电技术。通过配电网实时状态估计,将原本的不良数据转变成高精度数据,让配电网获取准确的数据信息,并通过拓扑辨识定位故障位置,对故障区域进行故障隔离,在考虑网损的情况下,计算出故障恢复的目标函数,从而完成配电网故障快速复电技术。最后,与传统的配电网故障复电技术进行了对比实验,实验结果表示提出的配电网故障快速复电技术具有更好的应用效果,网损量更小。
The previous rapid restoration technology for distribution network faults did not take into account network losses,resulting in a large amount of network losses in the rapid restoration technology for distribution network faults.Therefore,a fast restoration technology for distribution network faults considering network losses has been proposed.Through real-time state estimation of the distribution network,the original bad data is transformed into high-precision data,allowing the distribution network to obtain accurate data information and thereby realizing fault location through topology identification and isolation of fault area.Then,considering network loss,the objective function of fault recovery is calculated,thus achieving rapid restoration.The proposed method has been proved by comparative experiment to have better applicative utility compared with conventional technology and smaller network loss.
作者
任凯
乐程毅
葛颖丰
REN Kai;LE Chengyi;GE Yingfeng(State Grid Ningbo Zhenhai District Power Supply Company,Ningbo 315000,China)
出处
《电工技术》
2024年第2期127-129,共3页
Electric Engineering
关键词
网损最小
配电网故障
快速复电技术
故障定位
minimum network loss
distribution network failure
rapid restoration technology
fault location