摘要
渐进成形具有工艺灵活,适应性强等优点,受到了广泛的关注。本文以一镁合金花形异形零件为例,对其渐进成形工艺进行模拟研究。首先对其成形轨迹进行设定,之后建立有限元数值模拟模型,模拟研究不同的成形工艺参数对成形质量的影响,分析其影响规律,并给出最优的成形工艺参数,对于实际生产具有一定的指导意义。
Progressive forming has attracted widespread attention due to its flexible process and strong adaptability.This article takes a magnesium alloy flower shaped irregular part as an example to simulate the progressive forming process.Firstly,the forming trajectory is set,and then the FEM model was established for numerical simulation to study the impact of different parameters of the forming process on forming quality,analyze their impacting patterns,and provide the optimal forming process parameters,which has a certain guiding significance for actual production.
作者
赵新海
司志渊
李梦平
郑超
姜正义
ZHAO Xin-hai;SI Zhi-yuan;LI Meng-ping;ZHENG Chao;JIANG Zheng-yi(School of Material Science&Engineering,Shandong University,Ji’nan 250061,China;School of Mechanical,Materials and Mechatronic Engineer,University of Wollongong,Wollongong 2522 NSW,Australia;School of Materiasls Science and Engineering,Xi'an Jiaotong University,Xi'an 710049,China)
出处
《山东工业技术》
2024年第1期9-16,共8页
Journal of Shandong Industrial Technology
基金
山东省重点研发计划(重大科技创新工程)(2021ZLGX01)
中国留学基金委(202106225025)。
关键词
渐进成形
成形轨迹
工艺参数
数值模拟
progressive forming
forming path
processing parameter
numerical simulation