期刊文献+

深圳京基东滨时代大厦超限高层塔楼结构设计 被引量:1

Structural design of Kingkey Dongbin Times out-of-code high-rise tower in Shenzhen
下载PDF
导出
摘要 深圳京基东滨时代大厦塔楼为框架-核心筒结构,结构高度194.35m,属于超B级高度的超限高层建筑,四角及南北两侧均设有L形墙或一字形墙与框架梁平面外相接。为满足建筑功能需求,2层取消了大量楼板和外框架与核心筒相连的框架梁,形成跃层柱。41层东西两侧外框柱均往内收进,需设置托柱转换梁。以上难点增加了结构设计难度。采用性能化设计,有针对性地对关键部位采取相应的加强措施,并对特殊部位进行专项分析,如L形墙或一字形墙等特殊墙体、跃层柱、托柱转换梁等。通过弹塑性动力时程分析考察整体结构的抗震性能。计算结果表明:该结构抗震性能均能达到设计的预期目标。 Kingkey Dongbin Times tower in Shenzhen is a frame-corewall structure with a height of 194.35m.It is an out-of-code high-rise building with a height of over B-level.The four corners and the north and south sides were equipped with L-shaped walls or glyph walls and frame beams.In order to meet the functional requirements of the building,a large number of floor slabs and frame beams connecting the outer frame to corewall were cancelled on the second floor,forming skip-floor columns.The outer frame columns on the east and west sides of the 41st floor were retracted inward,and column transfer beams need to be set.The above difficulties increase the difficulty of structural design.Performance-based design was adopted to take corresponding strengthening measures for key parts,and special analysis was carried out for special parts,such as special walls such as L-shaped walls or one-shaped walls,skip-floor columns,and column transfer beams.The seismic performance of the whole structure was investigated by elastic-plastic dynamic time history analysis.The calculation results show that the seismic performance of the structure can meet the expected design goals.
作者 侯学凡 周小伟 张建军 张晓波 HOU Xuefan;ZHOU Xiaowei;ZHANG Jianjun;ZHANG Xiaobo(Shenzhen General Institute of Architectural Design and Research Co.,Ltd.,Shenzhen 518031,China)
出处 《建筑结构》 北大核心 2024年第4期92-98,共7页 Building Structure
关键词 超限高层建筑 框架-核心筒结构 L形墙 跃层柱 托柱转换梁 out-of-code high-rise building frame-corewall structure L-shaped wall skip-floor column column transfer beam
  • 相关文献

参考文献12

二级参考文献33

共引文献14

同被引文献7

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部