摘要
文章设计一种交换机网口自动安装堵头的设备,该设备可应用于多种系列的交换机产品生产。设备通过XYZ定位、移动产品,配合堵头安装机构安装不同位置的堵头。堵头采用振动盘进行供料,根据堵头种类需求设计多款振动盘独立供料,并配备视觉检测堵头供料的方向。该设备能够解决人工安装堵头作业难度大、效率低的问题。该设备适用于交换机种类样式多、网口数量多、网口种类多的场合,在生产线上得到了广泛应用。
This paper designs a device for automatic installation of plugs on the network port of switches,which can be applied to the production of various series of switch products.The equipment locates and moves the product through XYZ,and cooperates with the plug installation mechanism to install plugs in different positions.The plug is fed by a vibrating plate,and a variety of vibrating plates are designed to feed independently according to the needs of the plug type,and are equipped with visual detection of the direction of the plug feeding.The equipment can solve the problem of difficult and low efficiency of manual installation of plugs.The equipment is suitable for many types of switches,many network ports,and many types of network ports,and has been widely used in production lines.
出处
《时代汽车》
2024年第3期107-109,共3页
Auto Time
关键词
交换机
网口
堵头
自动化
Switch
Network port
Plug
Automation