船舶进气畸变模拟板结构设计与参数分析

Structural Design and Parameter Analysis of Ship Inlet Distortion Simulation Boards

Significant aerodynamic engine instability can occur during the operation of marine gas turbines as airflow enters the compressor through a 90°turning and causes inlet distortion.This study adopts the method of simulating board equivalence to provide the target distortion flow field for ship compressors.The characteristics of the flow field behind the simulated board are obtained through experiments and numerical simulations,through which the relationship between the height of the simulated board and the total pressure distortion is elucidated.Subsequently,the study summarizes the prediction formula to achieve a distortion prediction of 0.8%–7.8%.In addition,this work analyzes the effects of drilling methods and diameters on flow nonuniformity by drilling holes into the simulation board.The results indicate that drilling holes on the board can weaken the nonuniformity of the flow field within a certain range and change the distribution pattern of total pressure in the cross-section.Furthermore,the total pressure distortion no longer changes significantly when the number of holes is too large.The proposed double simulation board structure is capable of obtaining the following two types of distorted flow fields:symmetrical dual lowpressure zones and low-pressure zones with high distortion intensity at the compressor inlet.The distortion equivalent simulation method proposed in this work can obtain various types of distortion spectra,thereby meeting the distortion parameter requirements for the antidistortion testing of marine engines.