Tuning active sites in MoS_(2)-based catalysts via H_(2)O_(2)etching to enhance hydrodesulfurization performance

A H_(2)O_(2)etching strategy was adopted to introduce coordinatively unsaturated sites(CUS)on MoS_(2)-based catalysts for dibenzothiophene(DBT)hydrodesulfurization(HDS).The CUS concentrations on MoS_(2) slabs were finely regulated by changing the concentrations of H_(2)O_(2)solution.With the increasing H_(2)O_(2)concentrations(0.1–0.3 mol/L),The CUS concentrations on MoS_(2) slabs increased gradually.However,the high-concentration H_(2)O_(2)etching(0.5 mol/L)increased the MoOxSy and MoO_(3) contents on MoS_(2) slabs compared to etching with the H_(2)O_(2)concentration of 0.3 mol/L,which led to the less CUS concentration in the sulfided Mo–H-0.5 catalyst than in the sulfided Mo–H-0.3 catalyst.A microstructure-activity correlation indicated that the CUS introduced by H_(2)O_(2)etching on MoS_(2) slabs significantly enhanced DBT HDS.Different Co loadings were further introduced into Mo–H-0.3,which had the most CUS concentration,and the corresponding 0.2-CoMo catalyst with the highest CoMoS content(3.853 wt%)exhibited the highest reaction rate constant of 6.95×10^(−6)mol g^(−1)s^(−1)among these CoMo catalysts.