摘要
以单端乙烯基硅油、侧链含氢硅油以及端含氢硅油等为基础胶料,添加中空球形六方氮化硼和氢氧化铝等导热粉体,制得低介电高导热垫片。探讨了中空球形六方氮化硼和氢氧化铝的用量、乙烯基硅油的种类及黏度、导热粉体处理剂的用量及中空球形六方氮化硼的加料工艺对导热垫片性能的影响。结果表明,制得的导热垫片热导率为3.09 W/(m·K),介电常数3.17,表面粘性良好,能满足高导热低介电导热界面材料的性能要求。
A low dielectric and high thermal conductivity pad was prepared by adding hollow spherical hexagonal boron nitride and aluminum hydroxide thermal conductive powders based on single end vinyl silicone oil,side chain hydrogen containing silicone oil,and end hydrogen containing silicone oil.Effects of the dosage of hollow spherical hexagonal boron nitride and aluminum hydroxide,the type and viscosity of vinyl silicone oil,the dosage of thermal conductive powder treatment agent,and the feeding process of hollow spherical hexagonal boron nitride on the performance of thermal conductive pad were explored.The results show that the prepared thermal conductive pad has the thermal conductivity of 3.09 W/(m·K),the dielectric constant of 3.17,and good surface viscosity,which can meet the requirements of high thermal conductivity and low dielectric thermal conductivity interface materials.
作者
戴如勇
陆兰硕
潘泰康
李永波
DAI Ruyong;LU Lanshuo;PAN Taikang;LI Yongbo(Huizhou Meixin Electronics Co.,Ltd.,Huizhou 516199,China;Meixin New Materials Co.,Ltd.,Shenzhen 518053,China)
出处
《有机硅材料》
CAS
2024年第2期40-45,共6页
Silicone Material
关键词
垫片
低介电
六方氮化硼
导热
pad
low dielectric
hexagonal boron nitride
heat conductive