大型射电望远镜主反射面调整方法研究

Adjustment Method of Main Reflector for a Large Radio Telescope

随着毫米波天文学和空间通信的重要性日益提高,对天线性能提出了越来越高的要求,而天线性能往往受到其反射器表面精度的限制.微波全息技术是一种快速有效的检测反射面天线表面轮廓的测量技术.通过微波全息测量得到天线口径场,计算天马65m射电望远镜反射面与理想抛物面的偏差.天马65m射电望远镜的主反射面板是放射状的,有14圈.面板的每个角都固定在面板下方促动器的螺栓上进行上下移动,且相邻面板交点处的拐角共用一个促动器.采用平面拟合的方法可以计算各块面板拐角处的调整值,但是同一个促动器会得到4个不同的调整量.通过平面拟合,同时以天线照明函数为权重的平差计算方法得到相邻面板拐角的一个平差值,即天马65m射电望远镜1104个促动器的最佳调整值.通过多次调整和新算法的应用,天马65m射电望远镜反射面的面形精度逐渐提高到了0.24mm.

The performance of the antennas,which plays an important role in millimeter-wave astronomy and space communication,is often limited by their reflector surface accuracy.Microwave holography is a fast and effective technique for measuring the surface profile of reflector antenna.In this paper,the antenna aperture phase profile is obtained by microwave holography to estimate the deviation between the reflector and the ideal paraboloid of the Tianma 65 m radio telescope.The panels of the Tianma 65 m radio telescope is in radial pattern with 14 rings.Each corner of the panel is fixed on the screw of the actuator to move up and down,and the adjacent corners of the four panels share an actuator.We use the method of plane fitting to calculate the adjustment value of every panels corner.But one actuator,which simultaneously controls the common corner of the adjacent panels,will have different adjustment values according to the plane fitting equation based on adjacent panels.In this paper,an adjustment value at the corner of the adjacent panel is obtained by plane fitting and adjustment calculation method with the antenna illumination function as the weight,that is,the optimal adjustment value of 1104 actuators of the Tianma 65 m radio telescope.Through many adjustments and the application of new algorithms,the surface accuracy of the reflector of the Tianma 65 m radio telescope has gradually improved to the current 0.24 mm.