边坡支护工程设计和施工阶段关键技术分析

Analysis of Key Technologies in the Design and Construction Stage of Slope Support Engineering

工程项目在进行建设过程中,不可避免地会出现开挖情况,对于地质较差的地方,为减小开挖工作量,常设置相关边坡防护措施进行及时防护。而边坡的防护形式和措施较多,其应用条件和经济性均不一致,若不进行相关现场分析和评估,盲目采用过大的防护,容易造成经济浪费,因此如何根据设计过程中的数据采用贴合的边坡防护是施工所希望达到的目的。本文以娄底市某边坡工程开挖为例,结合当地场地条件,分别从设计和施工角度对其在项目进行中的关键性技术进行分析,从而提出相关解决方案,达到经济适用性目的。最终结果证明,在施工完成后,该边坡情况良好。拟为相关类似工程提供参考。

During the construction process of engineering projects,excavation is inevitable.In areas with poor geology,relevant slope protection measures are often set up to reduce excavation workload and provide timely protection.However,there are many forms and measures of slope protection,and their application conditions and economy are not consistent.If relevant on-site analysis and evaluation are not carried out,blindly using excessive protection can easily cause economic waste.Therefore,how to use appropriate slope protection based on the data in the design process is the goal that construction aims to achieve.This article takes the excavation of a slope project in Loudi City as an example,combined with local site conditions,and analyzes the key technologies of the project from the perspectives of design and construction,in order to propose relevant solutions and achieve the principle of economic applicability.The final result proves that the slope is in good condition after construction is completed.Intended to provide reference for similar projects.