摘要
对A公司熟料矿物组成跟踪研究,分析矿物组成情况与熟料强度的相关性,得出有效调控熟料矿物组成优化熟料强度的方案。结果表明:通过调整KH由0.920±0.01至0.895±0.01、保持窑皮长度在24 m以下、二次风温控制在1150℃左右,熟料强度由59.5 MPa提升至65.3 MPa,水泥中熟料掺比平均降低3.48%,吨水泥材料成本下降约7.31元,能够有效降低生产成本。
Track and study the mineral composition of Company A's clinker,analyze the correlation between mineral composition and clinker strength,and come up with an effective plan to regulate the mineral composition of clinker and optimize clinker strength.The results show that by adjusting the KH from 0.920±0.01 to 0.895±0.01,keeping the kiln skin length below 24 m,and controlling the secondary air temperature at around 1150℃,the clinker strength is increased from 59.5 MPa to 65.3 MPa,the average clinker ratio in cement is reduced by 3.48%,and the cost of cement materials per ton is reduced by about 7.31 yuan,which can effectively reduce production costs.
作者
高诗莹
Gao Shiying(China Gezhouba Group Cement Co.,Ltd.,Wuhan,430070 China)
出处
《水泥工程》
CAS
2024年第1期32-34,共3页
Cement Engineering
关键词
熟料矿物
硅酸盐矿物
熟料强度
矿物晶型
mineral conmposition
silicates
clinker strength
mineral crystal form