期刊文献+

脱酮肟型室温硫化硅橡胶固化深度的影响研究

Study on the effect of the curing depth of dentoxime vulcanized silicone rubber at room temperature
下载PDF
导出
摘要 针对脱酮肟型室温硫化硅橡胶的深层硫化影响因素进行研究,进一步探讨了补强填料添加量、硅油添加量和交联剂用量等因素对脱酮肟型室温硫化硅橡胶的影响;并将在不同条件下的固化深度进行了对比,研究补强填料、二甲基硅油和交联剂对室温硫化硅橡胶固化深度的影响。结果表明,随着补强填料的增加,密封胶固化深度下降,且当其加量过多时,影响更加明显;二甲基硅油的添加量过低时,对密封胶的固化深度无明显影响,随着其添加量逐渐增加后,密封胶的固化深度下降;过量交联剂会导致密封胶的固化深度下降明显。 The influencing factors of deep vulcanization of dentonoxime room-temperature vulcanized silicone rubber were studied,and the effects of reinforcing filler,silicone oil and cross-linking agent on dentoxime room-temperature vulcanized silicone rubber were further discussed.The curing depth under different conditions was compared to study the effects of reinforcing filler,dimethylsilicone oil and crosslinker on the curing depth of vulcanized silicone rubber at room temperature.The results showed that with the increase of reinforcing filler,the curing depth of the sealant decreased,and the effect was more obvious when the addition of the sealant was too much.When the addition of dimethicone oil was too low,it had no obvious effect on the curing depth of the sealant,and the curing depth decreased with the gradual increase of the addition amount.Excessive crosslinker could cause a noticeable decrease in the depth of cure of the sealant.
作者 杨永强 陈炳耀 全文高 蒋焯雄 林宇强 YANG Yongqiang;CHEN Bingyao;QUAN Wenhao;JIANG Zuoxiong;LIN Yuqiang(Guangdong Sanhe Holding Co.,Ltd.,Zhongshan 528429,Guangdong China;Guangdong Sanhe Chemical Technology Co.,Ltd.,Zhongshan 528429,Guangdong China)
出处 《粘接》 CAS 2024年第4期20-22,共3页 Adhesion
关键词 密封胶 硅橡胶 固化深度 sealant silicone rubber depth of cure
  • 相关文献

参考文献11

二级参考文献517

共引文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部