摘要
Three-dimensional(3D)printing of carbon fiber-reinforced thermoplastic composites(CFRTPs)provides an ef-fective method for manufacturing the CFRTPs parts with complex structures.To increase the mechanical per-formance of these parts,a 3D printing technology for short-continuous carbon fiber synchronous-reinforced thermoplastic composites(S/C-CFRTPs)has been proposed.However,the synchronous reinforcement that ex-isted only at particular positions led to a limited improvement in the mechanical performance of the 3D-printed S/C-CFRTP part,which made it challenging to meet the engineering requirements.To solve this problem,two methods for achieving synchronous reinforcement at all the positions of the 3D-printed S/C-CFRTP part are pro-posed.To determine a suitable printing process for the S/C-CFRTP part,a comprehensive comparison between the two methods was conducted through theoretical analysis and experimental verification,involving the print-ing mechanism,fiber content,impregnation percentage,and mechanical performance.The results indicated that the towpreg extrusion process was suitable for manufacturing the 3D-printed S/C-CFRTP part.Compared with the in situ impregnation process,the towpreg extrusion process led to a fiber content increase of approximately 7%and void rate reduction of approximately 6%,resulting in 19%and 20%increases in the tensile and flexural strengths of the 3D-printed S/C-CFRTPs,respectively.Additionally,an optimized process parameter setting for fabricating an S/C-CFRTP prepreg filament with excellent mechanical performance was proposed.The findings of this study can provide a new approach for further improving the mechanical performance of the 3D-printed advanced composites.
基金
supported by National Natural Science Foundation of China(Grant No.52130506)
Dalian Municipal Science and Technology Innovation Foundation of China(Grant Nos.2021RD08,2022JJ12GX027).