摘要
本文研究了粘结复合材料修复对裂纹金属板振动特性的影响规律。研究了补片几何参数对振动水平和修复效果的影响。振动水平由第一模态频率、模态阻尼损耗因子和裂纹尖端平面外的振幅表征。通过应力强度因子的幅值来评估修复效果。研究结果显示,修复后的应力强度因子会随着模态阻尼损失因子的增加而呈现渐进行为,尤其是在将阻尼材料插入复合材料补片的情况下,这种趋势更加显著。
This paper investigates the damping effect of bonded composite repair for vibration suppression of cracked metallic panels.Influence of patch geometric parameters on the vibration level and repair efficiency is examined.Vibration level is characterized by the first modal frequency,modal damping loss factor,and the vibration amplitude out of a plane at the crack tip.The repair efficiency is evaluated by the amplitude of stress intensity factor.Results reveal that after a repair the stress intensity factors exhibit an asymptotic behaviour as the modal damping loss factor increases,especially when inserting damping materials into the composite patch.
作者
刘双燕
朱冰冰
LIU Shuangyan;ZHU Bingbing(School of Aero Engine,Zhengzhou University of Aeronautics,Zhengzhou 450046,China)
出处
《郑州航空工业管理学院学报》
2024年第2期38-45,共8页
Journal of Zhengzhou University of Aeronautics
基金
河南省科技攻关项目(232102240037,242102241026,232102220028,242102110203)
郑州航空工业管理学院科研团队支持计划专项(23ZHTD01010)。
关键词
补片
维修参数
振动控制
裂纹金属板
patch
repair parameters
vibration suppression
cracked Metallic Panels