期刊文献+

关中西部中深层地热资源赋存特征及开发建议

Occurrence characteristics and development suggestions of mid-deep geothermal resources in western central Shaanxi
下载PDF
导出
摘要 为促进关中西部城区地热资源开发利用,通过分析地热资源分布及热储类型,结合地热地质条件提出开发建议。分析认为,关中西部热储类型主要包括孔隙型层状热储、岩溶型层状热储和裂隙型带状热储3种类型;扶风县赋存岩溶型层状热储,地热地质条件好,适合进行水热型地热资源开发利用;渭滨区、眉县赋存有孔隙型层状热储和裂隙型带状热储,地热地质条件较好,适合进行水热型地热资源开发利用;岐山县、金台区、陈仓区、凤翔区赋存孔隙型层状热储,地热地质条件中等,可根据地热地质条件选用水热型与换热型的地热资源开发利用;陇县、千阳县赋存孔隙型层状热储,但地热资源较差,适合开展换热型的地热资源开发利用。 The types of thermal resources in the western central Shaanxi mainly include pore layered thermal reservoirs,karst layered thermal reservoirs,and fractured-zone thermal reservoirs.Fufeng County has karst layered thermal reservoirs with good geothermal geological conditions,which is suitable for the development and utilization of hydrothermal geothermal resources.There are porous layered thermal reservoirs and fractured-zone thermal reservoirs in Weibin District and Meixian County,which have good geothermal geological conditions and are suitable for the development and utilization of hydrothermal geothermal resources.Qishan County,Jintai District,Chencang District and Fengxiang District have porous layered thermal reservoirs with moderately geothermal geological conditions,thus hydrothermal and heat exchange geothermal resources should be selected for development and utilization.Longxian County and Qianyang County are of porous layered thermal reservoirs,but the geothermal resources are relatively poor,which are suitable for the development and utilization of heat-exchanging geothermal resources.
作者 贾志刚 刘军 王峰 JIA Zhigang;LIU Jun;WANG Feng(Shaanxi Coal Geology Investigation Research Institute Co.,Ltd.,Xi’an 710021,China)
出处 《陕西煤炭》 2024年第4期74-78,共5页 Shaanxi Coal
基金 陕煤地质集团(2021) 陕投集团(2022)重大专项科研课题“关中西部城区地热能供暖系统集成及工程示范”研究项目。
关键词 关中西部 地热资源 赋存特征 地热地质条件 开发建议 western central Shaanxi geothermal resources occurrence characteristics geothermal geologic conditions development suggestion
  • 相关文献

参考文献8

二级参考文献83

共引文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部