Self-supported NiFe-LDH nanosheets on NiMo-based nanorods as high-performance bifunctional electrocatalysts for overall water splitting at industrial-level current densities

Efficient,durable and economic electrocatalysts are crucial for commercializing water electrolysis technology.Herein,we report an advanced bifunctional electrocatalyst for alkaline water splitting by growing NiFe-layered double hydroxide(NiFe-LDH)nanosheet arrays on the conductive NiMo-based nanorods deposited on Ni foam to form a three-dimensional(3D)architecture,which exhibits exceptional performances for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER).In overall water splitting,only the low operation voltages of 1.45/1.61 V are required to reach the current density of 10/500 mA·cm^(-2),and the continuous water splitting at an industrial-level current density of 500 mA·cm^(-2) shows a negligible degradation(1.8%)of the cell voltage over 1000 h.The outstanding performance is ascribed to the synergism of the HER-active NiMo-based nanorods and the OER-active NiFe-LDH nanosheet arrays of the hybridized 3D architecture.Specifically,the dense NiFe-LDH nanosheet arrays enhance the local pH on cathode by retarding OH-diffusion and enlarge the electrochemically active surface area on anode,while the conductive NiMo-based nanorods on Ni foam much decrease the charge-transfer resistances of both electrodes.This study provides an efficient strategy to explore advanced bifunctional electrocatalysts for overall water splitting by rationally hybridizing HER-and OER-active components.