Gradient-structure-enhanced dielectric energy storage performance of flexible nanocomposites containing controlled preparation of defective TiO_(2) and ferroelectric KNbO_(3) nanosheets

Next generation power system needs dielectrics with increased dielectric energy density.However,the low energy density of dielectrics limits their development.Here,an asymmetric trilayered nanocomposite,with a transition layer(TL),an insulation layer(IL),and a polarization layer(PL),is designed based on poly(vinylidene fluoride)-polymethyl methacrylate(PVDF-PMMA)matrix using KNbO_(3)(KN)and TiO_(2)(TO)as the nanofillers.The morphology and defect control of the two-dimensional nano KN and nano TO fillers are realized via a hydrothermal method to increase the composite breakdown strength(E_(b))and the composite energy density(U_(e)).The asymmetric trilayered structure leads to a gradient electric field distribution,and the KN and TO nanosheets block charges transfer along z direction.As a result,the development path of the electrical trees is greatly curved,and E_(b) is effectively improved.And the Ue value of the nanocomposites reaches 17.79 J·cm^(-3) at 523 MV·m^(-1).On the basis,the composite Ue is further improved by defect control in TO nanosheets.The nanocomposite KN/TO/PVDF-PMMA containing TO with less oxygen vacancy concentration(calcined at oxygen atmosphere)acquires a high Ue of 21.61 J·cm^(-3) at 548 MV·m^(-1).This study provides an idea for improving the energy storage performance by combining the design of the composite dielectric structure and the control of nanofillers’defect and morphology.