摘要
通过对某型号分体式导波雷达液位计测量组件结构的数学模型进行模态分析、静力分析和反应谱分析,得到了测量组件在各载荷工况下的位移和应力结果,并对螺栓的拉伸应力和剪切应力进行了校核。计算结果表明,测量组件结构满足规范和技术要求。
Through the modal analysis,static analysis and response spectrum analysis of the mathematical model of a certain model of the liquid level meter measuring module of the split guided radar,the displacement and stress results of the measurement module under various load conditions are obtained,the tensile stress and shear stress of the bolts are checked.The calculation results show that the structure of the measuring module meets the standards and technical specifications requirements.
作者
李亮
范瑾
张曙光
孙国良
LI Liang;FAN Jin;ZHANG Shuguang;SUN Guoliang(Nuclear and Radiation Safety Center MEE,Beijing 102400,China;China Nuclear Power Engineering Co.,Ltd.,Beijing 100840,China;Beijing Division,China Nuclear Power Technology Research Institute,Beijing 100086,China;China Telecommunication Technology Labs,China Academy of Information and Communications Technology,Baoding of Hebei Prov.071000,China)
出处
《核科学与工程》
CAS
CSCD
北大核心
2024年第1期121-128,共8页
Nuclear Science and Engineering
基金
深圳市科技计划资助项目(JSGG20190222175208070)。
关键词
分体式导波雷达液位计
测量组件
模态分析
反应谱分析
Liquid level meter of split guided wave radar
Measuring module
Modal analysis
Response spectrum analysis
