期刊文献+

变电站及其变压器在线状态监测系统

Online status monitoring system for substations and their transformers
下载PDF
导出
摘要 变电站及其变压器在线状态监测系统的出现,为电力设备的运维管理提供了一种先进、高效的解决方案。文章提出了变电站及变压器在线状态监测系统(Onling Condition Monitoring System, OCMS),该系统有助于用预测性维护取代变压器的预防性维护。OCMS是一种成本效益高、在线且准确的工具。通过实验结果分析,对所提出的系统效果进行了评价。OCMS适用于正常或异常故障的变压器,如通过溶解气体分析检测到的异常故障。因此,OCMS与市场上用于变压器状态监测的其他健康指数算法不同,性能更优异。 The emergence of online status monitoring systems for substations and their transformers provides an advanced and efficient solution for the operation and maintenance management of power equipment.This article proposes an online condition monitoring system(OCMS)for substations and transformers,which helps to replace preventive maintenance of transformers with predictive maintenance.The designed OCMS is a cost-effective,online,and accurate tool.The proposed system results were evaluated through experimental analysis.The designed OCMS is suitable for transformers with normal or abnormal faults,such as abnormal faults detected through dissolved gas analysis.Therefore,it is very different from other health index algorithms used for transformer condition monitoring in the market and has better performance.
作者 郑月阳 Zheng Yueyang(Electrical and Information Engineering School,Panzhihua University,Panzhihua 617000,China)
出处 《无线互联科技》 2024年第5期45-47,共3页 Wireless Internet Technology
关键词 变电站及变压器 在线状态监测 成本效益 准确性 substations and transformers online status monitoring cost effectiveness accuracy
  • 相关文献

参考文献3

二级参考文献44

  • 1杨丙乾,李航,雷贤卿,李济顺.基于运动轨迹测量的加工中心几何误差控制[J].河南科技大学学报(自然科学版),2005,26(2):15-17. 被引量:3
  • 2于捷,贾亚洲.数控车床故障模式影响与致命性分析[J].哈尔滨工业大学学报,2005,37(12):1725-1727. 被引量:22
  • 3唐志国,李成榕,黄兴泉,王伟,程序,李君.基于辐射电磁波检测的电力变压器局部放电定位研究[J].中国电机工程学报,2006,26(3):96-101. 被引量:51
  • 4黄兴泉,康书英,李泓志,张欲晓.GIS局部放电超高频电磁波的传播特性研究[J].高电压技术,2006,32(10):32-35. 被引量:37
  • 5DavidsonL,KlineK,KleinS,etal.SQLServer2008数据库设计与实现[M].程桦,张绪业,等,译.北京:人民邮电出版社,2009.
  • 6Kong L B,Cheung C F,Lee W B. A Kinematics and Experimental Analysis of Form Error Compensation in Uhra-precision Machining[ J ]. International Journal of Machine Tools & Manufacture ,2008,48 ( 5 ) : 1408 - 1419.
  • 7Eyup S T, Can C. A Cutting Force Induced Error Elimination Method for Turning Operations [ J]. Journal of Materials Processing Technology ,2005,170 : 192 - 203.
  • 8Ratchev S, Liu S, Huang W. An Advanced FEA Based Force Induced Error Compensation Strategy in Milling [ J ]. International Journal of Machine Tools & Manufacture,2005,46:542 - 551.
  • 9Ramesh R, Mannan M A, Poo A N. Error Compensation in Machine Tools-A Review Part I: Geometric, Cutting-force Induced and Fixture-dependent Errors[ J]. International Journal of Machine Tools & Manufacture ,2000,40 : 1235 - 1256.
  • 10王维,杨建国,姚晓栋,等.数控机床几何误差与热误差综合建模及其实时补偿[J].中国机械工程,2012,48(7):165-170.

共引文献411

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部