摘要
某型动力传动轴结构复杂,外表面花键涂层不允许磨损,动平衡在工作全转速下进行,高转速旋转时不平衡量值会产生波动,对动平衡工装及工艺方法要求高。开展动力传动轴动平衡工艺研究,采用理论计算和平衡试验相结合的分析方法,通过动平衡工装设计优化,采用如双频测速、雷达图监控、不平衡量的矢量图等分析先进动平衡方法,实现了动力传动轴动平衡故障和难点攻克,形成了一套实用有效的平衡工艺流程。
The structure of a certain type of power transmission shaft is complex,and its outer surface spline coating does not allow wear.It is carried out at full working speed during dynamic balancing,and the imbalance value will fluctuate during high-speed rotation,requiring high requirements for dynamic balancing fixtures and process methods.This article conducts research on the dynamic balance process of power transmission shafts,using a combination of theoretical calculation and balance testing analysis methods.Through the optimization of dynamic balance fixture design,advanced dynamic balance methods such as dual frequency speed measurement,radar image monitoring,and vector diagram of imbalance are analyzed.The faults and difficulties in dynamic balance of power transmission shafts are solved,forming a practical and effective balance process flow.
作者
陈祥鑫
郭勤涛
于丽丽
陈果
CHEN Xiangxin;GUO Qintao;YU Lili;CHEN Guo(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016;China Aerospace Harbin Dong’an Engine Co.,Ltd.,Harbin 150066;School of General Aviation and Flight,Nanjing University of Aeronautics and Astronautics,Liyang 213300)
出处
《现代制造技术与装备》
2024年第3期13-15,共3页
Modern Manufacturing Technology and Equipment
关键词
动力传动轴
动平衡
平衡工装
power transmission shaft
dynamic balance
dynamic balance methods
