期刊文献+

工业CT对混凝土中混杂钢渣颗粒的鉴别应用 被引量:1

Application of Industrial CT to Identify Mixed Steel Slag Particles in Concrete
下载PDF
导出
摘要 采用工业CT对混凝土中的钢渣颗粒和普通石子进行三维扫描,获得两者在形貌上的差异.将钢渣颗粒按体积分数3%、6%和9%掺入混凝土中,并使用工业CT扫描获得不同掺量钢渣颗粒混凝土试样的形貌学特征.基于图像相似法得到钢渣颗粒的灰度范围,并采用该灰度范围对图像进行二值化处理,计算钢渣颗粒的掺量.结果表明:钢渣颗粒掺量的计算结果与实际掺入的钢渣颗粒体积分数较为接近,误差范围小于±10%,具有较高精度.结合实际工程案例,采用工业CT和X射线荧光光谱分析仪(XRF)等测试手段,对钢渣颗粒引发的混凝土外观质量事故成因进行科学分析. Industrial computed tomography(CT)was used to perform 3D scanning of steel slag particles and natural gravel in concrete,and their morphological differences were obtained.Steel slag particles were mixed into concrete in volume fraction of 3%,6%and 9%and industrial CT scanning was used to determine morphological characteristics of concrete specimens containing varying proportions of steel slag particles.Based on the image similarity method,the gray range of steel slag was obtained,and the image was binarized to calculate the content of steel slag particles.The results show that the calculated results are found to be relatively close to the actual steel slag particles volume fraction added,with an error range of less than±10%of the actual value,indicating high accuracy.Finally,industrial CT,X-ray fluorescence spectroscopy(XRF)and other testing methods were used to scientifically analyze the causes of concrete appearance quality accidents caused by steel slag particles in an actual project.
作者 陈春 李之涵 潘伟行 傅琦 张亚梅 CHEN Chun;LI Zhihan;PAN Weixing;FU Qi;ZHANG Yamei(School of Materials Science and Technology,Southeast University,Nanjing 211189,China;Jiangsu Key Laboratory of Construction Materials,Southeast University,Nanjing 211189,China;Zhejiang New Century Engineering Detection Co.,Ltd.,Hangzhou 310022,China)
出处 《建筑材料学报》 EI CAS CSCD 北大核心 2024年第4期343-349,共7页 Journal of Building Materials
基金 2022年度南京市建设行业科技计划项目(Ks2216)。
关键词 混凝土 工业CT 钢渣 案例分析 concrete industrial computed tomography steel slag case analysis
  • 相关文献

参考文献4

二级参考文献27

共引文献37

同被引文献5

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部